Do you know the method of removing dirt from water stickers?

Water stickers have been applied in various industries and products

Release time:

2024-09-05

Water stickers have been applied in various industries and products, which facilitate the transfer printing technology on objects, making them beautiful and personalized in color and pattern. But sometimes, many water sticker toys and Gundam models are left dirty by children, so how should we remove them?
1. First, tear off the toy water sticker attached to the glass or product surface, soak the towel in warm water (hot water is used in winter), scrub the water sticker mark twice, then apply soap to the warm and wet towel, and scrub the mark several times. Then use a clean warm and damp towel to wipe off the soap foam, and the adhesive marks will be removed.
2. Evenly apply toothpaste to the surface of the water sticker, pause for a moment, and then wipe it with a soft cloth. Sometimes there are many strong stickers, so just apply toothpaste on the marks that have not been removed in one go. The method is still the same, and the headache sticker can be removed. The principle is that toothpaste contains glycerin, which is a good solvent that can dissolve the ingredients of the sticker. Many other cosmetics also contain glycerin and can be used to remove the sticker.
3. Furthermore, using a pen, paper, or knife to scrape, it is suitable for hard surfaces such as glass and floor tiles; Wipe with alcohol, suitable for glass, floor tiles, clothing, etc; Freezing: Once the water sticker becomes hard after freezing, it can be directly peeled off and is suitable for methods that are not suitable for alcohol or scratching.
4. I heard that wind oil essence can also work, and if it's glass, ceramic water stickers, or the like, they can be easily removed by blowing them hot with a hair dryer. However, it's not suitable for plastics as overheated plastics can deform.
5. Using a fan to blow hot is very effective, and it is convenient for everyone at home to have a fan. It can be used for stickers, glass, plastic, wood, and metal. First, use a fan to blow back and forth a few times, then pull apart a small edge and slowly tear along the direction of the pull while using the fan to blow hot. It works very well.